PDA

View Full Version : powerhouse turbo


cardude99
09-29-2006, 11:51 AM
how safe would it be on the car running at 12lbs of boost, and if it isnt safe on a stock car then what mods will i need to do to make it safe
________
TOYOTA MOTOR NORTH AMERICA SPECIFICATIONS (http://www.toyota-wiki.com/wiki/Toyota_Motor_North_America)

Mike@PowerHouse
09-29-2006, 12:33 PM
how safe would it be on the car running at 12lbs of boost, and if it isnt safe on a stock car then what mods will i need to do to make it safe

Safe is relative to the tune in the vehicle and the octane of fuel that will be used. We have run as much as 23psi on our test car, but the fuel was C16.

Power goals is a better measurement as to what boost will be needed.

Thank you,
Mike

ranebowcyxx
09-29-2006, 01:11 PM
Only 23 PSI?

Step it up man, don't hold back. LOL

Paulboy2006
09-29-2006, 02:10 PM
23psi??? holy moley.. u can run a small nail gun with that

rygen
09-29-2006, 02:13 PM
how safe would it be on the car running at 12lbs of boost, and if it isnt safe on a stock car then what mods will i need to do to make it safe

I'm running the 11psi spring just fine with exceptional results, and my car is driven daily and no issues.

cardude99
09-29-2006, 05:39 PM
but isnt there a risk of blowing a cylinder head, or my pistons
________
Girlfriends pics (http://girlfriendpics.org)

Parigee
10-05-2006, 08:39 AM
When ever using FI you will cause some damage to the car, reinforced eliptical psiton will help retard detonation and strenghen ur engine.