New Stainless Steel Teflon Lined OEM Fit Brake Hoses

**hotpart.com** · 09:42 PM

We have finally completed our Stainless Steel Teflon Lined Brake Hose Kits. These are the only true OEM fit DOT stainless brake hoses on the market. They come with all the proper factory mounting all the way down to the proper wire clips to replicate the OEM hose exactly. They can be found on our website under the Brake Hose link after clicking on the Mustang Image and selecting 05-Pres Mustangs.

If you have any questions do not hesitate to ask us.

**boss 245** · 04-26-2008

Nice, Thanks for putting that up.

**bscottie** · 07-30-2008

Brian, these are listed on the site for the cars with ABS, what about the ones without ABS, also do they come with a new washer/gasket for the attachment to the caliper? they seem to be a one use piece

**hotpart.com** · 07-31-2008

Our listings are listing anything separately so I am guessing they are the same. I do have a call into our Ford dealer to find out what they have listed. They are currently not coming with new crush washers but we are looking for a good source so we can supply them in the near future.

**bscottie** · 07-31-2008

thanks, I'll keep an eye out!

**hotpart.com** · 08-05-2008

The hoses are different in the front only. We have ordered the factory non abs hoses and should have them shortly to reverse engineer them. I will let you know once we get a look at what fittings they use on how long to get them done.

**Mwood** · 08-05-2008

Hey Hotparts, check your PM's once in a while; I've been waiting for a reply for a week; I want to spend some money! LOL

**hotpart.com** · 08-05-2008

Quote:

Originally Posted by Mwood

Hey Hotparts, check your PM's once in a while; I've been waiting for a reply for a week; I want to spend some money! LOL

I was waiting to find out about the hoses before returning your PM.

**Sniper308** · 08-05-2008

Wow, I somehow missed this thread. Just as well, though, I wasn't ready until now. I happened to put an order in for these for my car today, with Hotpart, and then here tonight... I see there's a thread on them. Wow!

Well, anyway, I'm sure looking forward to getting them on, front and rear, as soon as the non-ABS situation can be resolved. My mechanic is waiting on them, so I sure hope it's quick.

Russ

hujon · 08-05-2008

It would be great if you could find a good source for the washers and the caliper flow bolts as well. I was not able to get the washers off the stock lines without any damage to them.

My brakelines are currently still sitting in the garage unfortunately.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

	(#1)
hotpart.com Official 4.0 Collective Vendor Offline Posts: 305 Real Name: Brian Croutcher Thanks: 0 Thanked 0 Times in 0 Posts Join Date: Aug 2006 Location: Paso Robles CA Age: 41	New Stainless Steel Teflon Lined OEM Fit Brake Hoses - 04-26-2008 We have finally completed our Stainless Steel Teflon Lined Brake Hose Kits. These are the only true OEM fit DOT stainless brake hoses on the market. They come with all the proper factory mounting all the way down to the proper wire clips to replicate the OEM hose exactly. They can be found on our website under the Brake Hose link after clicking on the Mustang Image and selecting 05-Pres Mustangs. If you have any questions do not hesitate to ask us. Brian Croutcher J&M Products www.hotpart.com brian@hotpart.com 805-239-1558 Phone Last edited by hotpart.com; 04-26-2008 at 09:42 PM.

	(#2)
boss 245 The exception to the rule Offline Posts: 4,059 Thanks: 3 Thanked 3 Times in 3 Posts Join Date: Sep 2006 Location: Hastings Mi Age: 52	04-26-2008 Nice, Thanks for putting that up. 2005 V6 Automatic. Vortech V2, Chargecooled, 15 PSI. 4:10's in the 7.5. 11.851@112.74 2.62 pulley 11.76@109 12psi and 75 shot

	(#3)
bscottie Just Livin The Dream! Offline Posts: 4,141 Real Name: Bill Thanks: 0 Thanked 0 Times in 0 Posts Join Date: May 2006 Location: Southern California! Age: 48	07-30-2008 Brian, these are listed on the site for the cars with ABS, what about the ones without ABS, also do they come with a new washer/gasket for the attachment to the caliper? they seem to be a one use piece

	(#4)
hotpart.com Official 4.0 Collective Vendor Offline Posts: 305 Real Name: Brian Croutcher Thanks: 0 Thanked 0 Times in 0 Posts Join Date: Aug 2006 Location: Paso Robles CA Age: 41	07-31-2008 Our listings are listing anything separately so I am guessing they are the same. I do have a call into our Ford dealer to find out what they have listed. They are currently not coming with new crush washers but we are looking for a good source so we can supply them in the near future. Brian Croutcher J&M Products www.hotpart.com brian@hotpart.com 805-239-1558 Phone

	(#5)
bscottie Just Livin The Dream! Offline Posts: 4,141 Real Name: Bill Thanks: 0 Thanked 0 Times in 0 Posts Join Date: May 2006 Location: Southern California! Age: 48	07-31-2008 thanks, I'll keep an eye out!

	(#6)
hotpart.com Official 4.0 Collective Vendor Offline Posts: 305 Real Name: Brian Croutcher Thanks: 0 Thanked 0 Times in 0 Posts Join Date: Aug 2006 Location: Paso Robles CA Age: 41	08-05-2008 The hoses are different in the front only. We have ordered the factory non abs hoses and should have them shortly to reverse engineer them. I will let you know once we get a look at what fittings they use on how long to get them done. Brian Croutcher J&M Products www.hotpart.com brian@hotpart.com 805-239-1558 Phone

	(#7)
Mwood The Collective is a way of life!!! Offline Posts: 7,923 Thanks: 0 Thanked 14 Times in 13 Posts Join Date: May 2006 Age: 52	08-05-2008 Hey Hotparts, check your PM's once in a while; I've been waiting for a reply for a week; I want to spend some money! LOL 06 Satin Silver X Charger Extreme Vert tuned by Racers Edge. Hurst short throw, K-Member/Torque limiters, T-Lock/410 gears, Eibach Pro Kit, Tokico D Specs, Sway bars, PJ front bumper, TrueFiber hood, Bullitt grill, Agent 47 mirrors, Shaftmasters 4" driveline, Hankook Ventus tires.

	(#9)
Sniper308 Long-Range Surgeon Offline Posts: 3,574 Thanks: 0 Thanked 0 Times in 0 Posts Join Date: Jan 2007 Location: Silvis, IL Age: 55	08-05-2008 Wow, I somehow missed this thread. Just as well, though, I wasn't ready until now. I happened to put an order in for these for my car today, with Hotpart, and then here tonight... I see there's a thread on them. Wow! Well, anyway, I'm sure looking forward to getting them on, front and rear, as soon as the non-ABS situation can be resolved. My mechanic is waiting on them, so I sure hope it's quick. Russ "Putting *performance* into PERFORMANCE WHITE!" *** Orders I will NOT* obey!* 2005 Mustang ~ V6 Automatic ~ Performance White X-Charger #28 ~ Hi-Po ~ Explorer Express (Xtreme Intercooler #01) Custom 2.6" Pulley from South Florida Pulley Headquarters (Pulley Anti-Slip Coated by Carbinite Metal Coatings) Custom JDM Tune for XCal2 Tuner with 93-Octane Zabteck Throttle Body View My Garage for a list of all mods to date.

	(#10)
hujon 14-Second Member Offline Posts: 112 Real Name: Andreas Thanks: 0 Thanked 0 Times in 0 Posts Join Date: May 2007 Location: Portland, OR Age: 36	08-05-2008 It would be great if you could find a good source for the washers and the caliper flow bolts as well. I was not able to get the washers off the stock lines without any damage to them. My brakelines are currently still sitting in the garage unfortunately. 07 Black Vert Tokico D-Specs, KW Springs, J&M Upper Camber Plate Strut Mounts, Spohn adj. LCAs, J&M Panhard Bar, BMR adj. UCA and UCA Mount, J&M LCA relocation brackets, CHE Panhard Brace, CHE K-Member Brace w/ limiters, CHE Strut Tower Brace, GT front &rear sway bars, C&L CAI & VMP Tune, Prothane Engine Mounts, Pypes X & Magnaflows, Zabtech TB, GT500 wheels, Brembo BBK, MGW Shifter

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)